Monthly Archives: April 2018

Orange Pi Zero case

A small 3d printable Orange Pi Zero case with 3 cover variants:

  • closed
  • pins exposed
  • grill

STL: https://www.thingiverse.com/thing:2863308

Advertisements

LOLIN32 Lite OLED (ESP32) Combo case

LOLIN32 Lite (ESP32) with OLED 128×64 SSD1306 Combo (layered) case.

OLED SCK - ESP32 GPIO 4 / R10 (pin-to-pin)
OLED SDA - ESP32 GPIO 0 / R11 (pin-to-pin)
OLED GND - ESP32 GND (wire)
OLED VDD - ESP32 3.3V (wire)

STL: https://www.thingiverse.com/thing:2853161

 

 

Wemos D1 OLED (ESP8266) cases

Three versions of Wemos D1 with 128×64 OLED:

Same PCB aka ESP12F OLED

OLED 128×64 with SSD1306 controller built on the same PCB with Wemos D1 Mini usually named “ESP12F OLED” at Aliexpress.

STL: https://www.thingiverse.com/thing:2853146

Layered (Combo)

Using Wemos D1 Mini and put OLED 128×64 SSD1306 on-top/bottom of it, keeps it same width and height but a bit thicker.

OLED GND - Wemos D1 Mini GND (pin-to-pin)
OLED VDD - Wemos D1 Mini D4 (pin-to-pin)
OLED SCK - Wemos D1 Mini D3 (pin-to-pin)
OLED SDA - Wemos D1 Mini D2 (pin-to-pin)

STL: https://www.thingiverse.com/thing:2853148

Side-by-Side (ComboSBS)

Using Wemos D1 Mini and put OLED 128×64 SSD1306 side-by-side (SBS) with hot glue, is a bit cheaper than the “same-PCB” version.

OLED GND - Wemos D1 Mini GND (wire)
OLED VDD - Wemos D1 Mini 5V (wire)
OLED SCK - Wemos D1 Mini D2 (wire)
OLED SDA - Wemos D1 Mini D1 (wire)

STL: https://www.thingiverse.com/thing:2853149